"First post, but not my last,
"First post, but not my last, I have a 1987 Bayliner 14' with a force 50HP O/B, took boat out Saturday ran for about 30 minutes, then just quit, turns over just fine and getting gas, I pulled one plug to check for spark and I have no spark, I have read on this forum that the kill switch might be the problem, Model of the motor is 507X7A, I not sure how I would check to see if it is the Kill Switch, would I splice the wire at the Kill Switch or could I diconnect at the terminal block? Kill switch has two wires connected to it both are purple, one goes to the ignition switch other to the terminal switch. any help would be greatly apperciated, thanks again"
"First post, but not my last, I have a 1987 Bayliner 14' with a force 50HP O/B, took boat out Saturday ran for about 30 minutes, then just quit, turns over just fine and getting gas, I pulled one plug to check for spark and I have no spark, I have read on this forum that the kill switch might be the problem, Model of the motor is 507X7A, I not sure how I would check to see if it is the Kill Switch, would I splice the wire at the Kill Switch or could I diconnect at the terminal block? Kill switch has two wires connected to it both are purple, one goes to the ignition switch other to the terminal switch. any help would be greatly apperciated, thanks again"