PDA

View Full Version : Tomos 35hp air cooled


bitsinbobs
06-28-2009, 10:00 AM
"recently got one of these as a non runner but have since got it running I'm using a 25-1 fuel mix and ngk br7hs plug any one know if these are correct , thanks"
perryo
07-16-2009, 06:51 PM
do you know the model number or on mine it's next to the letters TIP i have a T3S the very little book i get with it say's use 50:1 and spark plug bosch w4ac with a gap of 0.4mm
bitsinbobs
07-17-2009, 10:16 AM
"Hi , numbers are T3.5 N 377834 any more info would be great"
perryo
07-17-2009, 10:35 AM
it sounds like it would be a newer one than mine so i would go with 50:1 on the mix i'll see what i can find out
perryo
07-17-2009, 11:03 AM
"see if you can open this my motor is a 1974 and it looks like yous is a 1983 so i would go with 50:1 http://www.tomos-autousluga.hr/cms_products/files/1974_file.pdf ("")"
perryo
07-17-2009, 11:29 AM
"you can try to translate this with babelfish
http://www.tomos-autousluga.hr/cms_products/files/2046_file.pdf ("")"
bitsinbobs
07-17-2009, 05:57 PM
"thanks for the effort you have put into this , still trying to get translated , I could not even find these pages , ta"
perryo
07-17-2009, 07:44 PM
i have a motor i'm looking to fix up myself no problem man
bitsinbobs
07-17-2009, 07:57 PM
"just got word that language is slovak http://www.marineengine.com/discus/clipart/proud.gif think polish guys might get it , I know some here , will check out"
bitsinbobs
07-17-2009, 08:00 PM
where are you ? I'm in Belfast N Ireland
bitsinbobs
07-17-2009, 08:29 PM
"From: DaDDo GooSe <[email protected] ("][email protected][/url]>
Subject: RE: moved on
To: "bitsinbobs" <http://translate.google.com/?hl=en&sl=sl&tl=en#


--------------------------------------------------------------------------------
Date: Fri, 17 Jul 2009 23:46:20 +0000
From: [email protected]

type wot out


R McC


--- On Sat, 18/7/09, DaDDo GooSe <[email protected]>
Subject: RE: moved on
To: "bitsinbobs" <[email protected]
Subject: RE: moved on
To: [email protected]> wrote:


From: DaDDo GooSe <[email protected]>
Date: Saturday, 18 July, 2009, 12:37 AM


V gd - looks the part
Mum will want one lol


--------------------------------------------------------------------------------
Date: Fri, 17 Jul 2009 18:55:20 +0000
From: [url=")
Subject: moved on
To: [email protected] ("")


a bit different from when u saw it

R McC



--------------------------------------------------------------------------------
Beyond Hotmail - see what else you can do with Windows Live. Find out more.



--------------------------------------------------------------------------------
View your Twitter and Flickr updates from one place – Learn more!"
perryo
07-17-2009, 08:56 PM
myself i'm in Detroit MI. US but if you can help with this it would be great thanks man
bitsinbobs
07-17-2009, 09:12 PM
"feck USA u r in ? whats wrong with your motor ? think i'll stick to 25 /1 runs ok and no bad smokehttp://www.marineengine.com/discus/clipart/happy.gif I have plenty of experience on bikes , too much oil better than http://www.marineengine.com/discus/clipart/angry.gif"
perryo
07-18-2009, 08:39 AM
"ya the USA sorry. i need to get the parts in the throttle handle and the cable that go to the carburator. and you might be right about the oil mix i have seen in the book some thing about 25:1 but have not translated it yet http://www.marineengine.com/discus/clipart/happy.gif"
bitsinbobs
07-19-2009, 08:27 AM
"you should be able to make a cable ok and use a thumb lever attached to handle ,"
perryo
07-19-2009, 09:02 AM
ya i was thinking the same thing i was also thinking i might be able to find another motor with a twist grip and adapt it to fit on this motor