Logo
FULL SITE MENU

75 hp cap and rotor

P

paulr

New member
Are there any options for repl

Are there any options for replacing the old mallory cap an rotor on a 1976 75 hp Chyrsler.

Thanks

Paul
 
"First- the rotor is part of t

"First- the rotor is part of the dist shaft and will not come off. So just the cap and points are serviceable with out taking the dist apart- then you might go to the hard ware store and replace the bearings. Points can just be cleaned as they had no real load on them. If some one put the shutter in there, just get a q-tip and clean the lens in the unit."
 
Back
Top