Logo

Engine turned over but would not start

jackman

Contributing Member
"Re previous posting which I c

"Re previous posting which I can't find now and replies from Guy/Puget Sounder/K Ghost/Bert; When new coil, new H/T lead coil to dist. and Sierra Electronic Ignitor 18-5296-2 conversion kit was fitted to replace Pertronix Ignitor the engine ran fine. For a few minutes and then started missing and backfiring. Turned out the metal pick-point on the end of the new rotor arm had come adrift and was swivelling around on the retaining screw. Replaced it with the old rotor arm from the Petronix and engine was AOK again."
 
Back
Top