I have a question about my TPS
I have a question about my TPS 1 and 2 measured values of resistance between connector terminals. Service manual states TPS1 fully closed should be 4-5 ohms and TPS2 should be 0.5-1. When I take a reading between the upper and middle terminals of each TPS I get the same reading whether at fully closed or fully open. What am I missing here?
I have a question about my TPS 1 and 2 measured values of resistance between connector terminals. Service manual states TPS1 fully closed should be 4-5 ohms and TPS2 should be 0.5-1. When I take a reading between the upper and middle terminals of each TPS I get the same reading whether at fully closed or fully open. What am I missing here?