PDA

View Full Version : MD11C Fuel Pump fittings



terryshugart
05-12-2009, 06:14 PM
The fuel pump on my MD11C has two hollow bolts for the input and output lines which according to the parts schematic are identical. On mine one has a restriction that looks like a nozzle. Can someone tell me if the restriction is supposed to be on the input or output?? My guess would be output. The only line restriction I see on the parts schematic is on the line from the filter to the high pressure pump.
Thanks
Terry

vosman
05-13-2009, 09:22 AM
The restricter goes in output of fuel filter to fuel injection pump.

terryshugart
05-13-2009, 05:59 PM
Thanks for the response. Yes I saw the restriction on the output of the filter to the pump. Not where mine was though. If I was to but a nozzle (that's what the parts list calls it) on a pump it would be on the output. So that's where I'll put it.
Thanks again for the response.
Terry