Logo

Spark plug wires

mschwenz

Contributing Member
I had accidently mixed up 2 of

I had accidently mixed up 2 of my spark plug wires on my 4 cyl. 3.0 and i have new wires that came today. Is there a way i could find out which wires go to which cylinder for certain? I never took the wires of the cap.
And how do i know where to each new wire on the cap because they have similar sizes? Does it matter?
 
"well you should have 1 long,

"well you should have 1 long, 1 med and 2 short, the 2 short goto #1 & #2, the Med goes to #3 and long to #4, the firing order is 1,3,4,2 and looking down on the dist it goes clock-wise. so with #3 on, the one counter-clockwise is #1 or put the long one on #4 the next one clockwise is #2 then #1

#1 on GM's is at the Belt driven end or FRONT with the Dist on the Starboard side of the boat. ( just in case the engine was mounted reverse or not in the boat )

Does it matter... not on lenght for #1 & #2 cuz they are so close but the order matters.

let us know if you need further assistance."
 
"well put brian<[img]"http://w

"well put brian
thumbs_up.gif
"
 
Back
Top