Logo

1997 Evinrude Ignition switch

R

Rockport

Guest
"Purchased a new ignition swit

"Purchased a new ignition switch and thought I marked the correct wiring to the terminals on the switch. I was wrong..On the wiring harness it was numbered 1 through 6 and on the switch we have a B,2,M,S,A,M,C. The color of the wires are yellow/red,yellow/black,red,purple/white,purple,and black/white. Can't seem to find a manual that tells which wire goes where."
 
B=Red Bat(+

B=Red Bat(+)
M=Black/Yellow Ign. short
M=Black/Wht Bat (-)
S=Yellow/red (Starter solenoid)
A=Purple Acc.
C=Purple/Wht. Choke

This is an aftermarket switch as the factory switch is 6 poles with no "2" terminal. You will not be using this terminal with your application.

God luck
Rick
 
Back
Top