PDA

View Full Version : 92 sea king



mygarageisfull
03-14-2009, 11:02 AM
"When I changed impeller , at the upper gearcase housing and exhaust housing there was no gasket?when looking at old outbourd service manual exploded view of lower unit assembly it does'nt show one is this corret? Metal to metal ? thanks,9.2hp. 1969? vwb29909a 96x what does the 96x mean? Have not used in long time but it was fast on 12' sea king alum. boat."

profisher
03-14-2009, 08:45 PM
No gaskets between gearcase and leg is normal. Isn't required to be water tight...seal on drive shaft keeps water out of gearcase.

galamb
03-15-2009, 12:33 PM
The 96x is simply the production year "backwards" - 69...

mygarageisfull
03-19-2009, 12:10 PM
Thank's for your help!

mygarageisfull
04-10-2009, 02:34 PM
"9.2 sea king 1969 ,I put new impeller in but no water is comeing out. I took a bit of rubber out of the pump,, where should I look next for a plug?"

mygarageisfull
04-11-2009, 07:01 PM
check the tube from water pump to motor. I did'nt push the tube back in to the water pump when I bolted the lower unit back on. I ask and anser my own questons.