Logo
FULL SITE MENU

Outdrive tilt motor

R

rbarrow

Member
"bravo 3 outdrive will not til

"bravo 3 outdrive will not tilt. mercruiser 5.0 gas. inline 20 amp fuse is good, fluid is full. all connections check. new motor in 2006.is there a second fuse in the wiring? suggestions."
 
"Ayuh,...

I think there&#39

"Ayuh,...

I think there's a 90amp at the solenoid,...

Have you jumped power from the battery directly to the solenoid,..??
By-passed the Solenoid,..??"
 
"Nope,... It's mounted to

"Nope,... It's mounted to the trim pump...

Follow the wire that goes directly from the Battery to the Trim pump...
It attachs to the Solenoid..."
 
Bondo.
the tilt motor has a g

Bondo.
the tilt motor has a green wire to the top solenoid and a blue to the lower. to bypass the solenoids do i attach a wire between the battery wire and either the blue or green? there is also a black ground. i am assuming there are two solenoids
 
"Ayuh,...

Yes, jump from th

"Ayuh,...

Yes, jump from the Battery to either the Green Or the Blue,+ it should run 1 way or the other...

Black wires are the Grounds..."
 
Bondo. Just-in-time.

there

Bondo. Just-in-time.

there is a 110 amp fuse where the battery wire connects to the solenoid. it is a square shape of about 1 inch red color. it was blown. the 110 amp due to the heavy load placed on it when tilting the outdrive at high speed. thanks for your help. cold weather shut me down.
 
"[b]"it was blown. the 110

""it was blown. the 110 amp due to the heavy load placed on it when tilting the outdrive at high speed."

Ayuh,...

Glad you found your problem,...
But,..
I rather doubt it was caused by using the trim while under Power,...
I'd think you have Something else going on....

Good Luck..."
 
Back
Top