Logo

Omc 800 series shift problems

natew

New member
last summer i purchased a 1985

last summer i purchased a 1985 renken 24'with a cuddy cabin the guy i got it from was vacationing and the anchor rope tangled in the prop he got it out and coninued going and the boat acted like it kicked out of gear without making any sound i tried to remove the lower unit but after removing the bolts it didnt come loose not knowing a lot about it i didnt dare to pry on it any help would be greatly appreciated
 
"You don't take an 800 low

"You don't take an 800 lower unit off like that. You have to remove the drive from the boat, then remove the upper to be left with the lower. Look for a manual on eBay, or your local library might have the Seloc one or you can buy or download the seloc one from this site.(look top right of this page)."
 
Back
Top