PDA

View Full Version : 87 tohatsu m40c



losttxrider
01-21-2009, 12:54 PM
i have an 87 M40c that came with a small boat i recently recieved. i had to drop the lower unit to access the water pump as the motor had sat for years. after replacing the impeller i have not been able to remount the lower unit. the brass seal that rides on the shift rod has a retaining pin that holds it in place. i have not been able to get the seal to reseat and be held by the retaining pin. if anyone has any thought on how i should do this please let me know. thank you.

tohatsu_guru
01-25-2009, 09:03 PM
I'm not sure what you are asking. You didn't pull the shift rod out the lower unit did you?