Aq130 c spark no fire

hey guys i got the firing orde

hey guys i got the firing order right...there all sparking as well but the spark does not seem strong on the plug side they are the old set of plugs u think new ones will do the trick??

"New plugs wouldn't hurt,

"New plugs wouldn't hurt, but the old ones should work as long as they are clean and gapped correctly.

Does the engine start? If not, and the spark is weak, look at points, condenser and ignition coil. Also, make sure you got the right coil for your application. If you have an external resistor, use a 1.5 ohm coil (without resistor); if not, you can use a 3 ohm coil with internal resistor.

Also, consider getting rid of the points and condenser in your distributor and install a Pertronix electronic ignition module. This will likely be one of the best investments you will make."