Logo

AQ130C Impeller Location

cartoad

New member
Can you tell me where the impe

Can you tell me where the impeller is on this unit and if difficult to change. Engine is running at 240. Also piping to oil cooler leaking. Could this be the reason for high temp. Gets hot quick! Thanks
 
"The pump is at the from of th

"The pump is at the from of the engine, just remove the cover to access the impeller."
 
Thanks for the info. Also how

Thanks for the info. Also how can I use a garden hose to run theunit to test and check for leaks.
What device do I have to have and where do I connect? Stern drive is a 280.
 
"You can attach a garden hose

"You can attach a garden hose with a set of "ear muffs" to the outdrive's lower unit. Alternatively, you can put a large pail under the outdrive and fill it with water with a garden hose while you test the engine (make sure the water covers the cavitation plate)."
 
"Also, do not forget to check

"Also, do not forget to check the condition of the hose connector in the sterndrive intermediate housing; it looks like a thermostat housing and it has the raw water hose attached to it. Loosen the hose clamp, disconnect the hose and if the connector is corroded, replace it."
 
Back
Top