Logo
FULL SITE MENU

FOUND WATER IN OIL PROB See water in oil below

R

robd

New member
Seems sand and or corrosion wa

Seems sand and or corrosion was in riser drain leaving some water in risers and manifold. Froze and Cracked. Lesson learned always poke a wire or something after you pull drain plugs.
Note to jeff.: you helped me last year with alignment questions. Thanks for all the help!!
 
For this reason I always run t

For this reason I always run the pink stuff through the motor--not just pour it into the block (as some do). Running the motor until the pink stuff comes out the exhaust eliminates this problem.

I hope the water didn't get into the motor!

Jeff
 
"last year, after using the bo

"last year, after using the boat for a few hours, without incident, my motor stalled at idol, and locked up. Found that the motor had filled up with water. (They have about 200 hours on them, over a 15 year period.) After draining the oil, a few times, and changing the 15 year old exhaust manifolds, the motor still filled with water upon starting briefly. What next? Manifold gaskets? Head gaskets? Block? Where do I start? Capt A"
 
Back
Top