K
KenKolbly
Guest
"I have a 1990 Chrysler Force
"I have a 1990 Chrysler Force 150 that I'm trying to tear down the lower unit to repair/rebuild it.
I have successfully removed the propeller shaft.
However, I am not able to get the motor shaft out of the housing. I have taken out the upper taper bearing raceway, carefully removed and saved the shims. Removed the nut on the bottom of the shaft.
Can someone tell me if the shaft is supposed to pull out with the gear in place or if the gear has to come off before the shaft will come out.
Also, if anyone knows if any special tools are required. (I can make almost anything) or if there any tip or tricks that would help.
Thanks,
Ken"
"I have a 1990 Chrysler Force 150 that I'm trying to tear down the lower unit to repair/rebuild it.
I have successfully removed the propeller shaft.
However, I am not able to get the motor shaft out of the housing. I have taken out the upper taper bearing raceway, carefully removed and saved the shims. Removed the nut on the bottom of the shaft.
Can someone tell me if the shaft is supposed to pull out with the gear in place or if the gear has to come off before the shaft will come out.
Also, if anyone knows if any special tools are required. (I can make almost anything) or if there any tip or tricks that would help.
Thanks,
Ken"