Logo
FULL SITE MENU

Tilt and trim gauge

R

rcahill31

Regular Contributor
"The needle on the tilt and tr

"The needle on the tilt and trim gauge has decided to stay stuck on up when the drive is down, is there a simple solution?"
 
"there is an adjustable stop o

"there is an adjustable stop on the outdrive, where you calibrate the gauge with the position of the drive. check that out first."
 
"Ronald. Check your connection

"Ronald. Check your connections first. I finally tracked a new sender unit down and fitted it only to find a bad terminal on the wiring was the cause, the same symptoms as yours."
 
Back
Top