Logo
FULL SITE MENU

351 ford indmar stall when put intp gear

A

appleknapil

New member
"351 indmar, holley 4160: stal

"351 indmar, holley 4160: stalls when put into gear? Idle and revs OK out of gear. No vacuum leak at base of carb. timing set @ 6 BTD dwell at 28 deg.
Could it be the power valve
or bad PVC valve?

Help
appleknapil"
 
"Pull the hose off the pcv val

"Pull the hose off the pcv valve at idle, if the motor immediately revs up higher, your pcv is working. If the motor does not rev, then that carb has been adjusted to compensate for the extra air coming in from the stuck open pcv valve.

regards,

Paul"
 
Back
Top