PDA

View Full Version : Multi Cylinder Gas Inboard



gryg1
06-01-2006, 10:44 PM
"Posted on Thursday, June 01, 2006 - 09:40 pm:

--------------------------------------------------------------------------------
Posted on Wednesday, May 31, 2006 - 12:13 pm:

--------------------------------------------------------------------------------
i have a chrisler 6 cyl motor 265 and my question is there are 2 outlets on the exhaust manifold .they are on the top of the manifold.1 inlet on the bottom.the bottom one i thing goes from the heat exchanges to the bottom of the manifold and then get expelled to the leg.i would like to know what the 2 top inlet/outlet holes are for because the other one that was originally on my boat did not have these.i assume it could be for exhaust manifold cooling.any one know about this info would be apprecoated.1976 model.no it is not a slant engine .flat head engine."

Eddie from Oregon
06-02-2006, 11:10 AM
"Stan, there is a similiar but seperate web site www.oldmarineengine.com ("") . That is a different site for old and antique engines. Multi Cylinder Gas Inboard is a catagory there already set up. You can then post on that disscussion board as you did here."