Logo

Chrisler 265 6 cyl motor

gryg1

Regular Contributor
i have a chrisler 6 cyl motor

i have a chrisler 6 cyl motor 265 and my question is there are 2 outlets on the exhaust manifold .they are on the top of the manifold.1 inlet on the bottom.the bottom one i thing goes from the heat exchanges to the bottom of the manifold and then get expelled to the leg.i would like to know what the 2 top inlet/outlet holes are for because the other one that was originally on my boat did not have these.i assume it could be for exhaust manifold cooling.any one know about this info would be apprecoated.
 
Is that a slant engine? I assu

Is that a slant engine? I assume it is not a flat head engine.
 
"OK, Stan, I suggest that you

"OK, Stan, I suggest that you go to Old Marine Engine and post under the topic " Multi Cylinder Gas Inboard " . Use the same title and your first posting and add that it is a flat head. The people on that discussion board are more familiar with older engines of that type and you might get a better response.
The automotive version of that engine was used in Chysler Corporation cars into 1955 or later."
 
Back
Top