Logo
FULL SITE MENU

Outdrive id help

J

joey1117

New member
i have a 1984 sea sprite with

i have a 1984 sea sprite with a merc 140 hp motor and i need a water pump how do i know what outdrive i have so i can order the right pump kit? there are no id tags at all on the drive please help
joe
 
"here are some pics maybe that

"here are some pics maybe that will help also one of the bellows has a hole in it not sure what parts to order
thanks
joe
214504.jpg
214505.jpg
214506.jpg
214507.jpg
214508.jpg
"
 
That is an Alpha One drive.
Y

That is an Alpha One drive.
You need an impeller kit and a bellows kit.
You should replace all 3 bellows at the same time.
Kits are avialable with a new gimbal bearing; suggest you change it while you are at it.

Also check your U joints for tightness and integrity. YOu should have grease nipples on them for 1984. Much better than current U joints that cannot be greased.

Rod
 
"When you grease your u-joints

"When you grease your u-joints, if any water comes out replace them. Mine felt fine but when I took them out they were rusty."
 
"thanks guys i got yhe parts c

"thanks guys i got yhe parts comming new kit with housing ,new bellows gimble bearing ,and hoses ,is this a diy kind of job i have the service manual it does not look hard let me know
thanks again
joe"
 
"Joe, go all the way and do th

"Joe, go all the way and do the shift cable & trim senders at the same time & yes this job can be a pain in the ass."
 
Back
Top