Logo

Stern drive locked in the up position

denny800

New member
"stern drive was working a wee

"stern drive was working a week ago and now when I hit the switch to lower the out drive or the trim and all I get is clicks. I'm getting 13 volts to all the solenoids and have checked grouns etc. I did change the water pump on the motor since I used the boat last. Anyone have some advise?
Thanks, Denny"
 
Helm side solenoid -down- port

Helm side solenoid -down- port side solenoid -up- It sounds like if you just put a jumper from the working solenoid you'll find the other one is actually bad.
 
Back
Top