Logo

How do you fill lower unit Sea KingClinton 35hp

sgruebs870

New member
I bought a Montgomery Ward Sea

I bought a Montgomery Ward Sea King (Clinton Engine) 3.5hp and am wondering how you flush and fill the lower unit? Is it pretty self explanitory? Any help would be greatly appreciated. Thanks!!!!
 
"if im not mistaken which some

"if im not mistaken which sometimes i am, if it doesnt have 2 screws on the lower end ( 1 to fill the other to vent ) than its filled with grease."
 
"Thanks, Scott. I'm still

"Thanks, Scott. I'm still confused though. All I see are two bolts holding the skeg on and above that, two bolts holding the lower unit on. I can't find a grease zerk to fill it with grease either. I'm stumped."
 
See the "Lower unit oil ch

See the "Lower unit oil change in a '74 5HP Clinton Wards Sea King" posting. Andy B was asking a similar question. He found that he had to actually remove the 4 screws holding the bottom end together to replace the grease (not oil)in the bottom end.
He was looking for the Vent/Fill screws for a while before figuring it out with the help of a manual.
I hope this helps.
 
Back
Top