Running engine

"There,s got to be a way....ho

"There,s got to be a way....how do you get water to the engine if you have no lower unit...i hope there is a way.
james"

"There is an adapter that will

"There is an adapter that will fit into the water intake hole in the gimbal housing.
check with your dealer.
Alternativly you can hook your water supply directly into the raw water inlet to the T'stat housing, though you will have to do some plumbing gymnastics to hook it up.

Watch how much pressure you apply. Cooling systems run at only a few pounds, even closed systems. Since your leg is not going to be pumping water, turn the water on first and adjust the flow so you have a decent stream coming out the exhaust opening in the gimbal, or the water outlet ports.

Rod"

thanks rod....i'm going to

thanks rod....i'm going to try to find that adapter
thanks

a hose from a washing machine

a hose from a washing machine cut in half

where do you put the cutoff en

where do you put the cutoff end of the hose...the washing machine hose?