Logo

1997 57lx help

sircosmo

New member
"I'm replacing the oil sen

"I'm replacing the oil sender and oil switch on this engine, my issue is the manual shows according to the wire diagram to place the switch kit just above the oil filter and the oil sender just to the right side of the distributor. these parts will not fit in these two respective places. does any one have pics of these two sender locations with the parts above in place..."
 
"Keep in mind that it should b

"Keep in mind that it should be an 1/8 pipe thread screw-in, which means you could use an extension or an elbow if needed."
 
"the 90 elbow on on top is cor

"the 90 elbow on on top is correct but requires the switch kit, then a reducer nipple would allow the sender to be placed above the oil filter but the color code will be backwards per the manual I was hoping someone has the parts installed and can send me a pic ,, the sensors were not their when I started so I have no reference other than the wire color."
 
Back
Top