Logo

6hp evinrude water pump problem

M

mike north

Guest
need help to servic water pump

need help to servic water pump if anyone can help
 
thanks for the reply scallywag

thanks for the reply scallywag
i have a 1977 6hp evinrude that doesn't seem to be getting water through. i have undone the 4 bolts in the middle of the leg and noticed there is a shaft and a pipe and a black plastic fixture which i assume is the water pump. the pipe is not connected to anything. should it be and if so to what and how do i get to it. i cannot get the bottom of the leg to come away. can you help.
thanks michael
 
"Hi Michael
There should be 2


"Hi Michael
There should be 2 shafts and 1 tube. 1 drive shaft, 1 gear selection shaft and the water delivery tube. On the gear shaft there should be a joiner with 2 screws in it. If you undo one of these the lower section will seperate from the top.The drive shaft will slide out of the g/box and water pump assy.A parts list can be found at www.evinrude.com-en-us and find your mod ect."
 
Back
Top