Logo
FULL SITE MENU

BF5A water impeller grommet Justintime

C

cosmosailer

New member
"In installing a new kit, I&#3

"In installing a new kit, I've removed shredded
rubber from the cover & ports but am unsure of
the location for the part labelled "grommet".
Does it go under the 13mm waterseal part or atop
of the impeller towards the shaft ? Dealer cannot
help much either. Thanks."
 
"Jeff, which number on the dia

"Jeff, which number on the diagram are you talking about? Number 10 is the only part I see listed as a "grommet" and it is for the end of the watertube

148040.gif
"
 
"Board members, thanks for dia

"Board members, thanks for diagram & advice.
I learned by trial that the grommet part in question was not for this model. Dropped the leg
a second time, cleaned out, reassembled and pump
works fine with good pressure !"
 
"Is there a substitute for the

"Is there a substitute for the fuel connector at the end of the fuel line going to the motor of a 1985 BF-100 10 hp? I can't find a replacement fuel line connector. thanks, Dick"
 
Back
Top