atilla_boy
Regular Contributor
"the pump will trim up but not
"the pump will trim up but not down. there is 2 solenoids on the pump one is on the top and its for up movement the other is on the bottom of the pump, its for the down movement. I jumped the solenoid accross the 2 small terminals and nothing happens, so I jumped the 2 larger terminals and it trims down. I tested each terminal and the is power where there should be and ground where there should be with the multimeter. so I know its the solenoid. my ? is can i replace this with a typical ford starter solenoid just as i did for the starter on my engine due to a savings of about $50.00..."
"the pump will trim up but not down. there is 2 solenoids on the pump one is on the top and its for up movement the other is on the bottom of the pump, its for the down movement. I jumped the solenoid accross the 2 small terminals and nothing happens, so I jumped the 2 larger terminals and it trims down. I tested each terminal and the is power where there should be and ground where there should be with the multimeter. so I know its the solenoid. my ? is can i replace this with a typical ford starter solenoid just as i did for the starter on my engine due to a savings of about $50.00..."