Logo
FULL SITE MENU

Ford 2712E weight amp engine mounts

G

geoffgentil

New member
"Does anyone know the weight o

"Does anyone know the weight of the 2712E as I am trying to get the correct engine mounts. I have a PRM 500 gearbox which weighs 70kg, perhaps someone can recommend good flexable mounts. I presently have a lot of vibration below 1000 rpm and would like to get it out below idling."
 
The 2712E weighs 874 pounds.

The 2712E weighs 874 pounds.
The 2715E weighs 1092 pounds
The 2704ET (turbo 6 cyl) weighs 1120 pounds
All weights less transmission.
Per the 1978 Lehman operators manual.
 
"What we have found works best

"What we have found works best is using R&D Marine mounts #800-011 and move the rear mount brackets onto the transmission which spreads the load more evenly. Sometimes adding a flex coupling like the R&D # 910-009 can help. Or, you can go "Cadillac" and install an aquadrive with their cushy float mounts."
 
"Thank you Michael, I am not f

"Thank you Michael, I am not familiar with the R&D mounts I am a New Zealand yacht presently in Malaysia. Do they have a web site or do you have a contact for them please. I have a double universal and thrust bearing set up between the gearbox and prop shaft. I appreciate your suggestions"
 
Back
Top