PDA

View Full Version : Low Voltage Display



bigace
01-08-2008, 03:00 PM
"Hi,I am getting a "low voltage" display from my depthfinder when trolling at low idle speed.I am also installing a new stator for other operating reasons.Should this new take care of the low voltage problem or could this be a totally different problem?
p.s. the battery is charged and or new! Thanks
"FISHIN FOOL"
http://www.marineengine.com/discus/messages/8/145961.jpg\"

justintime
01-09-2008, 02:35 AM
do you have a handheld voltmeter

bigace
01-09-2008, 10:48 AM
Yes

justintime
01-09-2008, 03:07 PM
"here is the test

put the meter on a/c volts
now put the meter on the battery
raise rpm to around 1500 rpm
if you see more than .8V bad reg/rectifier
then you switch over to volts, you want at least 13.5 volts"