Logo

Mercruiser 30 Timing how can I set it

fcorunner

New member
"How can I set the timing in m

"How can I set the timing in my mercruiser 3.0 /95 with electronic ignition, I am going to use a timing light gun, I heard that I have to use a by-pass in the distributeur, is this true ?

Francisco"
 
"There's a wire you have t

"There's a wire you have to ground. It's kinda sitting there, going nowhere. (Great explanation, right?) The wire puts the advance at zero so you cna set it.

Jeff"
 
No. There's one wire in t

No. There's one wire in the harness that goes nowhere. That's the one you have to ground.

Suggest you look in a manual to avoid a costly error.

Jeff
 
"I have 1999 Glastron GM inlin

"I have 1999 Glastron GM inline4 cly. It runs good, sometimes it will run for anywhere between 15 to 20 min. then will bog down won't run very well. It almost sound like an over heated car engine. Temp seems to be within specs. Also will run good forever under no load. Help would be so nice, would like to fish without worry."
 
"Jamie,

Did you check the g


"Jamie,

Did you check the gas filters..??? are you using water/gas separator..??

try first checking your gas filters then if your problem continues... is possible that you need a water/gas separator...!!

Francisco Herrera
Ecuador / South America
Bayliner Capri/1750"
 
Back
Top